Your engine needs a Catch Can, it's that simple and RIPP has designed this RIPP Catch Can System (RCCS) specifically for your 3.5L Toyota Tacoma!
Oil catch cans are simple devices that can increase performance of any engine. The V6 and I4 engines found in your Tacoma will greatly benefit from the use of a catch can as they are notoriously known for excessive blow-by gas. Not all catch cans are created equal and though there are many designs the RIPP Catch Can System shines above all the rest.
Here's why they're beneficial to your engine and how a catch can works.
Your engine relieves pressure from the crankcase through a hose that connects the valve cover to the intake manifold. This pressure is commonly refereed to as "blow-by". The ventilation of blow-by gases allow oil and gunky condensation into the intake manifold. This actually leads to more serious issues like contaminated intake air. Contaminated air is when the crank case fumes actually mix with clean air and lowering your octane. This leads to pre-ignition or pinging. This will cause issues with tuning and overall engine power. Even worse these contaminants will start to build up inside the intake runners and valves. When left unchecked this buildup can hurt fuel economy, horsepower, and can even cause misfires.
Adding a catch-can will prevent oil and other contaminants from causing buildup inside your engine. Essentially the catch can will act as a collection system. Installed into the crank-case ventilation hose to "catch" the contaminants before they can reach the intake manifold. The RIPP catch-can is focused on filtration and baffling. The RIPP Catch Can System (RCCS) has an integrated baffle plate and aSintered Bronze Filter which acts as a liquid/fume separator creating an extra layer of filtration. This cleans the fumes as they pass from that can into your intake. With the RIPP Catch Can System you are covering all your bases to make sure you're getting the best filtration and separation on the market all it a package that's easy to own and maintain.
RIPP Catch Cam System Features:
Sintered Brass Filtered breather to catch the smallest contaminants
Larger 300.00 ML Capacity
Machined Dipstick for no-hassle oil level checking
Aluminum hose fittings
Billet Bracket for a perfect fit
No Drilling Required
Anodized parts for longevity
Easy Bolt On Installation
Pre-prepped Lines with anti chafing nylon sheathing.
I have a 2016 tacoma and this oil catch can is doing its job! Installation was easy, nothing you cant do in your driveway. I check and drain it every oil change (5-6k miles), maybe sooner in the colder months I'd definitely recommend getting this.
Kenneth B.
Took a 700 mile trip with the catch can for its maiden voyage. When I got home, I was very surprised to find, 30ml of a very powerful smelling oil substance that was very water like. I am so glad I didn't wait any longer than I have. As I plan on keeping my truck for the long haul.
Travis C.
I have just recently installed and have noticed some oil it’s already collected! Great product.
Eyal B.
Keep the engine clean for longer rides. Installation takes about 45 minutes. Highly recommended. Thanks, Ripp Mods!
David J.
I would like to see a better description for the long hose and short hose. So that' it's clear what goes where. Secondly, a clear photo or diagram of where the hose are to route would be great. Then some zip ties to secure the hose.
Kristopher K.
Super nice quality love it
Cory O.
Easy installation, only a couple hundred miles on it and it seems to have captured quite a bit. Looks great in the engine bay. Nice quality
Jacob T.
A well made and high quality product! I love that you don’t have to cut the stock PCV tube to make it work like another company’s. After 2 tanks of gas it had already started to collect oil so it’s absolutely doing it’s job and I can’t wait to see what it collects after 2.5k and 5k miles.
The only 2 things that I would like to note that kept me from giving the product a full 5 stars is that it comes with spring clamps and I would absolutely pay the few dollars extra for small t-band clamps with a hex head, and it didn’t mount the way it was supposed to for my 2020. Instead of mounting on the outside of the fan shroud, like the directions described, I had to mount mine in between the shroud and the radiator
Jacob M.
Install takes about 15 minutes, the spot on the radiator where you are supposed to install it is slightly different on a 2021 tacoma. I had to put a few washers to make it level.
Paul O.
Easy install and outstanding customer service!
Manuel R.
I love this product easy to install and protection for my engine’s life, i would say if this product was was designed to be place by the fender it would be less hoes length and probably a much better spot to be at. But over all i love this!!!
Ramiro P.
Very nice to install. Looks great . Was shipped to me ASAP . Thanks guys
Branden S.
Straight forward and easy to install. If your vehicle is a manual you may have to route the hose that the 90⁰ connects to slightly different. And no that is not a complaint. I absolutely love it. I Have had it on my truck less than 2k miles and it's already doing its job. Thank you for making such an amazing product.