Hands Down the most reasonably priced, easiest to install power adder on the market for the 09-2011 Dodge Hemi RAM.This kit has been revised to 6psi 400 Rear Wheel HP which is safe for the stock transmission
This kit features a signature Vortech V3 Si-trim Self-Contained centrifugal supercharger, an over sized water to air intercooler and a large heat-exchanger unit mounted behind the grill. As a whole this kit bolts on in 6 hours and is plug and play ready.
Set up at 6psi peak and tuned on 91oct fuel, the kit features larger primary injectors, plug and play RIPP map sensor and comes with a preprogrammed Diablosport inTune to reflash the ECU. Preliminary tests show our 2010 RAM 1500/2500 Quad Cab producing just 267-280 rear wheel HP (WHP) stock. With our proto-type supercharger installed we've squeezed 440ft/lbs or torque and 430whp in a completely check engine light free environment with all emissions and knock control features on, making it extremely safe for any form of motor-sport.
PENDING: Legal for use in California
****Although the tune included with this system is calibrated for your vehicle the user is responsible for any further Dyno tuning to refine the calibration to their liking. The tune should be considered standard. The user should look forward to proper Dyno tuning and not rely on the standard tune. RIPP is not responsible for tuning or discrepancies between different dyno readings. Many Dynometers read in different net output depending on manufacture, style, elevation, and temperature. RIPP advertises SAE HP captured at the wheel instead of at the crank for the most realistic scenario as possible. 0-60 times and quarter mile times may vary based on driving style and other variable out of our control.
*** HARDWARE ONLY ***
This package will come with NO TUNER, INJECTORS, OR MAP SENSOR.